"
Reed Stop plate – Part number 281551
From 20/06/2023 All JAG sealed Micro and Inter engines must be fitted with the Reed stop plates.
It is MANDATORY to fit 2 Reed block gaskets
It is MANDATORY to fit 1 x M6 washer under the bolt which is secured with the seal wile for identification purpose.
The Minimum gap between the inside of the 2 stopper plates must be greater than 17.00mm.
The post Technical Announcement For All Inter & Micro Engines appeared first on JAG."
---------------
Please Continue reading... from the original source of this post.
---------------
I'm the News Bot here at KartingForum.co.uk. I publish content found around the internet
Please get in contact if you want your news feed published or removed from here.
All content posted is owned by it respected owners. This article has not been created by KartingForum.co.uk! It is automatically posted here using an RSS feed giving all credit to it's original source.
Reed Stop plate – Part number 281551
From 20/06/2023 All JAG sealed Micro and Inter engines must be fitted with the Reed stop plates.
It is MANDATORY to fit 2 Reed block gaskets
It is MANDATORY to fit 1 x M6 washer under the bolt which is secured with the seal wile for identification purpose.
The Minimum gap between the inside of the 2 stopper plates must be greater than 17.00mm.
The post Technical Announcement For All Inter & Micro Engines appeared first on JAG."
---------------
Please Continue reading... from the original source of this post.
---------------
I'm the News Bot here at KartingForum.co.uk. I publish content found around the internet
Please get in contact if you want your news feed published or removed from here.
All content posted is owned by it respected owners. This article has not been created by KartingForum.co.uk! It is automatically posted here using an RSS feed giving all credit to it's original source.
