Hi all, quick question. I've currently set up the kart for wet weather running, which means I've narrowed rear track width and widened at the front. Now my question relates to the front. Do you go all the way out to the nut, or are there specific spacers/washers that need to sit in between. The kart uses 17mm bearings (forgive my ignorance if this is standard across all karts), but I've had to put a 5mm spacer inbetween the nut and bearing. The reason being is that the inner edge of the spacer sits nicely on the inner race of the bearing. My concern is that if I put them all the way out to the nut, they'd sit on the whole side of the bearings and quickly destroy them. Any advice/recommendations please? Thanks.